Could anybody say a little about what ColorSpace::setAllocation() and ColorSpace::setAllocationVars() do?
I'm starting to get up and running writing my own luts into the spi1d format for converting from float scene-linear to various outputs, which makes sense so far. I was cribbing from the spi-vfx python script which sets these and I've found fiddling with the numbers drastically alters the quality of my output. I'm guessing this affects the resolution of some internal data used for HDR->LDR but browsing the code doesn't make it clear how it works. And what is the origin of the [-15.0, 6.0] values used in spi-vfx?
Jeremy Selan <jeremy...@...>
Yes, that important functionality is under documented. I'll try totoggle quoted messageShow quoted text
update the headers / documentation this week. But in the meantime...
The allocation / allocation vars are utilized using during GPU 3dlut /
shader text generation. (Processor::getGpuShaderText,
If, in the course of GPU processing, a 3D lut is required, the
"allocation / allocation vars" direct how OCIO should sample the
colorspace, with the intent being to maintain maximum fidelity and
Currently support allocations / variables:
// 2 vars: [min, max]
// 2 vars: [lg2min, lg2max]
// 3 vars: [lg2min, lg2max, linear_offset]
So say you have an srgb image (such as an 8-bit tif), where you know
the data ranges between 0.0 - 1.0 (after converting to float). If you
wanted to apply a 3d lut to this data, there is no danger in sampling
that space uniformly and clamping data outside (0,1). So for this
colorspace we would tag it:
allocationvars: [0.0, 1.0]
(These are the defaults, so the tagging could also be skipped.)
But what if you were actually first processing the data, where
occasionally small undershoot and overshoot values were encountered?
If you wanted OCIO to preserve this overshoot / undershoot pixel
information, you would do so by modifying the allocation vars.
allocationvars: [-0.125, 1.125]
This would mean that any image data originally within [-0.125, 1.125]
will be preserved during GPU processing. (Protip: Data outside this
range *may* actually be preserved in some circumstances - such as if a
3d lut is not needed - but it's not required to be preserved).
So why not leave this at huge values (such as [-1000.0, 1000.0]) all
the time? Well, there's a cost to supporting this larger dynamic
range, and that cost is reduced precision within the 3D luts sample
space. So in general you're best served by using sensible
allocations (the smallest you can get away with, but no smaller).
Now in the case of high-dynamic range color spaces (such as float
linear), a uniform sampling is not sufficient because the max value we
need to preserve is so high.
Say you were using a 32x32x32 3d lookup table (a common size). Middle
gray is at 0.18, and specular values are very much above that. Say
the max value we wanted to preserve in our coding space is 256.0, each
3d lut lattice coordinates would represent 8.0 units of linear light!
That means the vast majority of the perceptually significant portions
of the space wouldnt be sampled at all!
unform allocation from 0-256:
So another allocation is defined, lg2:
Scene-linear, high dynamic range. Used for rendering and compositing.
allocationvars: [-8, 8]
In this case, we're saying that the appropriate ways to sample the 3d
lut are logarithmically, from 2^-8 stops to 2^8 stops.
Which gives us a much better perceptual sampling of the space.
The one downside of this approach is that it can't represent 0.0,
which is why we optionally allow a 3d allocation var, a black point
offset. If you need to preserve 0.0 values, and you have a high
dynamic range space, you can specify a small offset.
allocationvars: [-8, 8, 0.00390625]
The [-15.0, 6.0] values in spi-vfx come from the fact that all of the
linearizations provided in that profile span the region from 2^-15
stops, to 2^6 stops. One could probably change that black point to a
higher number (such as -8), but if you raised it too much you would
start seeing black values be clipped. Conversely, on the high end
one could raise it a bit but if you raised it too far the precision
would suffer around gray, and if you lowered it further you'd start to
see highlight clipping.
I hope this makes sense. (I wrote this in a hurry). Please let me
know if you need further clarification.
On Mon, Sep 26, 2011 at 10:56 AM, Ciaran <ciaran...@...> wrote:
Could anybody say a little about what ColorSpace::setAllocation() and
Jeremy Selan <jeremy...@...>
FYI - I've updated the website with the previous response to thetoggle quoted messageShow quoted text
question. (In the upcoming weeks I'll be adding even more info /
examples about creating color configurations).
On Mon, Sep 26, 2011 at 10:56 AM, Ciaran <ciaran...@...> wrote:Could anybody say a little about what ColorSpace::setAllocation() and